1. factory reset
-
poweron
-
press and hold the reset button till the 3 leds goes out
-
release the button
2. firmware
old: 1.4.2 Build 191129 Rel.51095n(4555)
new: 1.4.3 Build 200731 Rel.42132n(4555)3. initial setup
-
connect a networkcable to the WAN port to your intranet
|
remember to add the mac-address to the DHCP server |
-
connect a networkcable to the LAN1 or LAN2 port to a laptop or workstation
-
create an administrator password Passw0rd 2 times
-
select Brussels, Copenhagen, Madrid, Paris as the timezone
-
skip when you get Internet Port Disconnected
-
fill in d88x2 as Network Name (SSID)
-
fill in d88d88d88 as Password
-
next
-
skip on No Internet Connection
4. modes
4.1. access point
-
advanced
-
select Access Point Mode
-
reboot
4.2. dhcp client
-
advanced
-
select Range Extender Mode
-
reboot
-
local password Passw0rd
-
Connect to Host Network and select d88b2 and password d88d88d88
-
fill in d88x2 as Network Name (SSID)
-
next
-
save
5. connect a client
-
connect to ssid d88x2 or connect with networkcable